Milwaukee

3510-21  (flyer)

USB CHARGEABLE GREEN 3-POINT LASER

• 1/8″ @ 33′ accuracy
• 150′ working range
• self leveling +/- 4 degree 
• locking pendulum

kit includes (1) 3.0amp lithium USB battery, charging                                cable, wall plug & case

3521-21   (manual)  (flyer)

USB CHARGEABLE GREEN CROSS LINE & PLUMB POINTS LASER

• 1/8″ @ 33′ accuracy
• 100′ working range
• 165′ range with detector
• locking pendulum

kit includes (1) 3.0amp lithium USB battery, charging                                cable, wall plug & case

3522-21   (manual)  (flyer)

USB CHARGEABLE GREEN CROSS LINE & PLUMB POINTS LASER

• 1/8″ @ 33′ accuracy
• 100′ working range
• 165′ range with detector
• locking pendulum

kit includes (1) 3.0amp USB lithium battery, charging                                 cable, wall plug & case

2111-21   (manual)

USB CHARGEABLE  HARD HAT HEADLAMP

• 475 lumens
• 5 output modes
• IP54 water & dust proof
• tilting lamp

kit includes (1)3.0 amp lithium USB battery, charging                                cable & hard hat clips

2112-21   (manual)

USB CHARGEABLE ROVER POCKET FLOOD LIGHT

• 445 lumens
• 2 output modes
• dual magnet clip
• IP54 water & dust proof

kit includes (1)3.0 amp lithium USB battery & charging                                cable

2161-21   (manual)

USB CHARGEABLE 1100L TWIST FOCUS FLASHLIGHT

• 1,100 lumens
• 3 output modes
• 175 meter beam distance
• IP67 water & dust proof

kit includes (1)3.0 amp lithium USB battery & charging                                cable

48-11-2131

LITHIUM 3.0 AMP USB BATTERY

• 2 year warranty

2402-20 / 22  (manual)  (parts list)

M12 POCKET DRIVER

• 325 in lbs torque
• 2-speeds
• 1/4″ quick change chuck

bare tool & kit

kit includes (2)2.0 amp lithium batteries, charger & case

2505-22  (manual)  (parts list)

M12 FUEL INSTALLATION DRILL DRIVER

• 1/4″ quick change chuck, 3/8″ steel chuck, offset driver & right angle attachment
• 300 in lbs torque

kit includes (2) 2.0 amp lithium batteries, charger & bag

2503-20 / 22  (manual)  (parts list)

M12 FUEL DRILL DRIVER

• 1/2″ metal chuck
• 350 in lbs torque
• 1700 rpm

bare tool & kit

kit includes (1) 2.0 amp lithium battery, (1) 4.0XC amp lithium battery, charger & case

2504-20 / 22  (manual)  (parts list)

M12 FUEL HAMMER DRILL DRIVER

• 1/2″ metal chuck
• 350 in lbs torque
• 1700 rpm

bare tool & kit

kit includes (1) 2.0 amp lithium battery, (1) 4.0XC amp lithium battery, charger & case

2553-20 / 22  (manual)  (parts list)

M12 FUEL IMPACT DRIVER

• 1/4″ quick change chuck
• 1300 in lbs torque
• 4-mode drive control

bare tool & kit

kit includes (2) 2.0 amp lithium batteries, charger & case

2454-20 / 22  (manual)  (parts list)

M12 FUEL 3/8″ IMPACT WRENCH

• 1400 in lbs / 117 ft lbs torque
• 2-mode drive control

bare tool & kit

kit includes (2) 2.0 amp  lithium batteries, charger & case

2416-20  (parts list)

M12 FUEL 5/8″ SDS ROTARY HAMMER 

• 1.7 ft lbs impact energy
• 2 modes – rotary & hammer
• 3.9 lbs weight

bare tool

2556-20  (manual)  (parts list)

M12 FUEL 1/4″ RATCHET

• 40 ft lbs torque
• 250 in lbs torque
• LED light
• variable speed trigger

bare tool

2557-20  (manual)  (parts list)

M12 FUEL 3/8″ RATCHET

• 55 ft lbs torque
• 200 in lbs torque
• LED light
• variable speed trigger

bare tool

2460-20  (parts list)

M12 ROTARY TOOL

• 5,000 – 32,000 rpm
• 1/32 – 1/8″ shank accessories

bare tool

2485-20  (manual)  (parts list)

M12 FUEL 1/4″ RIGHT ANGLE DIE GRINDER

• 0.3 hp motor output
• 4-mode speed control
• 0-24,500 rpm
• 1.2 lbs

bare tool

2522-20 / 21XC  (manual)  (parts list)

M12 FUEL 3″ CUT OFF TOOL

• 20,000 rpm
• compatible with Dremel Saw-Max accessories
• tool free guard adjustment

bare tool & kit

kit includes (1) 4.0 XC amp  lithium battery, carbide abrasive blade, diamond blade, metal cut off wheel, adapter flange, shoe guard, charger & bag

2530-20  (manual)  (parts list)

M12 FUEL 5-3/8″ CIRCULAR SAW

• 1-5/8″ depth of cut
• 170 cuts per charge
• LED light

bare tool

2520-20 / 21XC  (manual)  (parts list)

M12 FUEL HACKZALL RECIP SAW

• 5/8″ stroke length
• 0 – 3,000 strokes per minute
• LED light

bare tool & kit

kit includes (1) 4.0XC amp  lithium battery, charger & case

2529-20 / 21XC  (manual)

M12 FUEL SUB-COMPACT BAND SAW

• one handed use
• 2-1/2″ cut capacity
• LED light
• 30-9/16″ x 1/2 x .020 blade length
• 6.96 lbs

bare tool

kit includes (1) 4.0XC lithium battery, 12/14 tpi blade, charger & case

2540-20  (manual)  (parts list)

M12 23 GAUGE PIN NAILER

• 1/2″ to 1-3/8″ pin length
• dry fire lockout
• up to 750 pin nails per charge
• double action trigger
• led light

bare tool

2550-20  (manual)  (parts list)

M12 RIVET TOOL

• upto 450 rivets per charge
• 3/32, 1/8, 5/32 & 3/16″ Aluminum, steel & stainless rivet capacity

bare tool 

2313-21  (manual)  (parts list)

M12 M-SPECTOR 360

• 9mm x 36″ camera whip
• 4-LED lights
• 2.7″ LCD rotatable display

kit includes (1) 1.5 amp  lithium battery, (hook, magnet & mirror attachments, charger &  bag

2471-21  (manual)  (parts list)

M12 COPPER TUBING CUTTER

• 200 cuts per charge
• 500 rpm
• 1/2 – 1″ od pipe diameter capacity

kit includes (1) 2.0 amp  lithium battery, charger & case

2592-20  (manual)  (parts list)

M12 WIRELESS JOBSITE SPEAKER

• bluetooth capable
• 2.1amp USB charger jack
• 3.5mm AUX port

bare tool

2951-20  (manual)  (parts list)

radio + charger

• bluetooth & AM/FM radio
• water & dust resistant
• charges all m12 batteries
• USB charging port
•  run up to 10 hours with 2amp battery
• runs off m12 battery or 120v plug

3622-21   (manual)    (flyer)

M12 GREEN CROSS LINE & PLUMB POINTS LASER

• 1/8″ @ 33′ accuracy
• 125′ working range
• 165′ range with detector
• micro pivot control
• 3 year warranty

kit includes (1) 3.0amp lithium battery, charger, target &                          case

3632-21   (manual)  (flyer)

M12 GREEN 360 DEGREE 3-PLANE LASER KIT

• 1/8″ @ 33′ accuracy
• 125′ working radius
• 165′ working radius with detector
• micro pivot control
• 3 year warranty

kit includes (1)4.0 XC lithium battery, charger, target &                              case

2808-20 / 22  (manual)  (parts list)

M18 FUEL 7/16″ QUICK CHANGE HOLE HAWG DRILL

• 7/16″ quick change chuck
• max. recommended bit 2-9/16″
• approx. 220 holes w/ 7/8 diameter bit

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2809-20 / 22  (manual)  (parts list)

M18 FUEL 1/2″ SUPER HOLE HAWG DRILL

• 1/2″ steel chuck
• upto 6-1/4″ 3-tooth hole saw
• approx. 100 holes w/ 2-9/16 diameter bit

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2811-20  (manual)  (parts list)

M18 FUEL 7/16″ QICK CHANGE SUPER HAWG DRILL

• quick change – auger, hole saw & self feed bits
• up to 6-1/4″ 3-tooth hole saw
• approx. 100 holes w/ 2-9/16 diameter bit

bare tool & kit

2853-20 / 22  (manual)  (parts list)

M18 FUEL IMPACT DRIVER

• 1/4″ quick change chuck
• 2,000 in. lbs. torque
• 4.59″ long driver (not including bit)

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2962-20 / 22   (manual)  (parts list)

M18 FUEL 1/2″ COMPACT IMPACT WRENCH 

• 650 ft. lbs. nut busting torque
• 550 ft. lbs. fastening torque
• 4-mode DRIVE CONTROL
• friction ring pin
• 3 LED lights

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2767-20 / 22  (manual)  (parts list)

M18 FUEL  1/2″ HIGH TORQUE IMPACT WRENCH 

• friction ring
• 1,400 ft. lbs. nut-busting torque
• 1,000 ft. lbs. fastening torque
• 4-mode DRIVE CONTROL

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2997-22 

M18 FUEL HAMMER DRIVER DRILL & IMPACT

• 2804 hammer driver drill (manual)(parts list)
  •  1,200 in lbs torque
  • 3.2 lbs without battery
• 2853 1/4″ impact driver (manual)(parts list)
  • 2,000 in lbs torque
  • 2.2 lbs without battery

kit includes (2)5 amp lithium batteries, charger & case

2730-20 / 21  (parts list)

M18 FUEL 6-1/2″ CIRCULAR SAW

• 2-3/16″ depth of cut
• LED light
• 6.8 lbs

bare tool & kit

kit inlcudes (1)5.0 lithium battery, blade,  charger & bag

2732-21HD  (manual)  (parts list)

M18 FUEL 7-1/4″ CIRCULAR SAW 

• 2-1/2″ depth of cut
• electric brake
• LED light
• up to 750 cuts per charge (12 amp battery)

kit includes (1)HD 12 amp lithium battery, charger, blade & bag

2830-20 / 21HD  (manual)  (parts list)

M18 FUEL 7-1/4″ REAR HANDLE CIRCULAR SAW 

• 2-1/2″ depth of cut
• electric brake
• LED light
• up to 570 cuts per charge (12 amp battery)

bare tool & kit

kit includes (1)HD 12 amp lithium battery, charger, blade & bag

2737-20  (manual)  (parts list)

M18 FUEL D-HANDLE JIG SAW

• approx 105 linear feet of 3/4″ particle board per charge
• 1″ stroke length
• LED light
• t-shank style blades

bare tool

2737B-20  (manual)  (parts list)

M18 FUEL BARREL GRIP JIG SAW

• approx 105 linear feet of 3/4″ particle board per charge
• 1″ stroke length
• LED light
• t-shank style blades

bare tool

2733-20 / 21  (manual)  (parts list)

M18 FUEL 7-1/4″ DUAL BEVEL SLIDING COMPOUND MITER SAW

• 2 x 8 cut capacity at 90 degrees
• approx. 600 cuts per charge
• 48 degree bevel capacity
• 28 lbs. with battery

kit includes (1)5 amp battery, charger, clamp, blade & wrench

2734-21HD  (manual)  (parts list)

M18 FUEL 10″ DUAL BEVEL SLIDING COMPOUND MITER SAW

• approx 400 cuts per charge (9.0 amp battery)
• 2X12 horizontal cut capacity
• 5-3/4″ vertical cut (base board against fence)

kit includes (1)XC8.0 high output lithium battery, blade, dust bag, clamp & charger

2736-21HD  (manual)  (parts list)

M18 FUEL ONE KEY     8-1/4″ TABLE SAW

• approx 600 linear feet of cut per charge (12.0 amp battery)
• 24-1/2″ rip capacity with fence
• 2-1/2″ depth of cut 

kit includes (1)HD12.0 high output lithium battery, blade, pawls, guard, miter gauge, riving knife & charger

2782-20 / 22  (manual)  (parts list)

M18 FUEL 5-3/8″ – 5-7/8″ METAL CUTTING CIRCULAR SAW

• approx. 370 cuts in 3/4 EMT
• LED light
• 5.9 lbs

bare tool & kit

kit includes (2)5.0 lithium batteries, 30 tooth carbide blade, charger & bag

2982-20 / 21 (manual)  (parts list)

FUEL 8″ METAL CUTTING CIRCULAR SAW

• 2-9/16″ depth of cut
• electric blade brake
• onboard chip collection
• approximately 120′ of deck cutting per charge with 8amp high output battery

bare tool & kit

kit includes (1)xc8.0 amp battery, 42 tooth steel cutting                             blade, rapid charger & bag

2836-20   (manual)  (parts list)

M18 FUEL OSCILLATING MULTI-TOOL

• all metal gear case
• auto-load precise cut mode
• tool free blade change
• LED light

bare tool, (1)wood blade, sanding pad & (4)sanding triangles

2719-20   (manual)  (parts list)

M18 FUEL HACKZALL

• 7/8″ stroke length
• one handed design
• tool free blade change
• 4.07 lbs

bare tool

2821-20 / 22    (manual)  (parts list)

M18 FUEL SAWZALL RECIPROCATING SAW

• 1-1/8″ stroke length
• tool free blade change
• LED light
• 7.4 lbs

bare tool & kit

kit includes (2)5.0 lithium batteries, blade, charger & case

2722-21HD   (manual)  (parts list)

M18 FUEL SUPER SAWZALL RECIPROCATING SAW

• 1-1/4″ stroke length
• tool free blade change
• LED light
• 8.8 lbs

kit includes either (1)HD12.0 lithium battery, blade, charger & bag

2829-20 / 22    (manual)  (parts list)

M18 FUEL  COMPACT  BAND SAW

• 3-1/4″ x 3-1/4″ cut capacity
• LED light
• variable speed trigger
• constant power technology

bare tool & kit

kit includes (2)XC5.0 lithium battery, blade, charger & bag

2729-20 / 21    (manual)  (parts list)

M18 FUEL DEEP CUT BAND SAW

• 5″ x 5″ cut capacity
• LED light
• 90% same parts as corded
• constant power technology

bare tool & kit

kit includes (1)XC5.0 lithium battery, blade, charger & case

2784-20  (manual)  (parts list)

M18 FUEL 1/4″ DIE GRINDER

• approx. 25 minutes continuous grinding (5.0 battery)
• 20,000 rpm
• 3.05 lbs.

bare tool

2880-20   (manual)   (parts list)

M18 FUEL 4-1/2″/5″   GRINDER W/NO-LOCK PADDLE SWITCH

• 5/8-11 arbor
• clutch & over load protection
• 8,500 rpm
• 11 amp corded power
• 5.8 lbs

bare tool

2882-22   (manual)

M18 FUEL ON-KEY 4-1/2″/5″ BRAKING  GRINDER W/NO-LOCK PADDLE SWITCH

• rapid brake feature
• 5/8-11 arbor
• clutch & over load protection
• 8,500 rpm
• 5.8 lbs. 

bare tool & kit

kit includes (2)XC6.0 H.O. lithium batteries, guard, flange nuts, charger & case

2785-21HD  (manual)  (parts list)

M18 FUEL 7″/9″ LARGE   GRINDER W/TRIGGER SWITCH

• 5/8-11 arbor
• clutch & over load protection
• 6,600 rpm
• 5.8 lbs

kit includes (1)HD12.0 lithium battery, 9″ guard, side handle, spanner, charger & bag

2738-20  (manual)  (parts list)

M18 FUEL 7″ VARIABLE SPEED POLISHER

• full size car per charge (5.0 amp battery)
• lock-on trigger
• variable dial & trigger
• 0-2,200 rpm
• 6.4 lbs with battery

bare tool

2786-20  (manual)  (parts list)

M18 FUEL 9″ CUT-OFF SAW W/ONE-KEY

• 3.4″ depth of cut at 90 degrees
• water hook-up
• blade brake
• table 1 compliant with 2820-21ws water tank supply (special order) (more info)
• 10.6 lbs. bare tool

includes 9″ abrasive cut-off wheel & 9″ diamond                                     segmented blade

2804-20 / 22  (manual)  (parts list)

M18 FUEL HAMMER DRILL DRIVER

• 1/2″ metal chuck
• 1,200 in lbs torque
• 32,000 BPM

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, charger & case

2912-20 / 22DE   (parts list)

M18 FUEL 1″ SDS ROTARY HAMMER 

• 2 ft lbs impact energy
• Autostop – kickback control
• 3 modes – rotary, hammer, chisel
• 2-1/2″ thin core bit capacity
• 7 lbs weight

bare tool & kit

kit includes (2) 5.0 amp lithium batteries, HAMMERVAC, side handle, HEPA filter, charger & case

2915-20  (manual)  (parts list)

M18 FUEL ONE-KEY 1-1/8″ SDS ROTARY HAMMER 

• 3.6 ft lbs impact energy
• 3 modes – rotary, hammer, chisel
• 3″ thin core bit capacity
• 7.7 lbs weight

bare tool

2717-22HD  (parts list)

M18 FUEL 1-9/16″ SDS MAX ROTARY HAMMER 

• 5 ft lbs impact energy
• 3 modes – rotary, hammer, chisel
• 4″ thin core bit capacity
• 10.1 lbs weight

kit includes (2) 8.0 amp H/O lithium battery, side handle, charger & case

2746-20  (manual)  (service guide)  (parts list)

M18 FUEL 18 GAUGE BRAD NAILER

• 5/8″ to 2-1/8″ fastener length
• tool free depth adjustment
• nitrogen air spring technology
• 6.3 lbs

bare tool

2839-20 / 21CT   (manual)  (parts list)

M18 FUEL 15 GAUGE 2ND GEN ANGLED FINISH NAILER

• 1-1/4 – 2-1/2″ fastener length
• 34 degree angle “DA” style finish nail
• LED light

bare tool

kit includes (1)2.0 amp lithium battery, charger & case

2745-20 / 21  (manual)   (service guide)  (parts list)

M18 FUEL 30 DEGREE PAPER TAPE FRAMING NAILER

• 2 – 3-1/2″ fastener length
• 30 – 34 degree paper tape framing nail
• offset clipped style head

bare tool

kit includes (1)5.0 amp lithium battery, charger & case

2361-20

M18 ROVER FLOOD LIGHT

• 1,500 lumens
• up to 10 hours on a 5.0 amp lithium battery

tool only

2360-20

M18 ROVER DUAL POWER FLOOD LIGHT

• 3,000 lumens
• up to 9 hours on a 5.0 amp lithium battery
• ac or battery power

tool only

2145-20

M18 RADIUS COMPACT SITE LIGHT

• 4,400 lumens
• option to hang up-side down
• ac in and out – string up to 10 lights together
• 180 or 360 degree light control

tool only

2135-20

M18 ROCKET TOWER LIGHT/CHARGER

• 3,000 lumens
• upto 8 hours on a 5.0 amp lithium battery
• 3 independently pivoting light heads
• 4′ up to 7′ extension option
• ac or battery power

tool only

2890-20

M18 JOBSITE RADIO

• am/fm tuner, 3.5 aux in port
• USB charging port
• ac or battery power
• not a charger

tool only

2792-20

M18 JOBSITE RADIO/CHARGER

• bluetooth, am/fm & aux in port
• USB charging port
• on-board storage space
• ac or battery power
• built-in charger

tool only

2950-20

M18 PACKOUT RADIO + CHARGER

• bluetooth, am/fm & aux in port
• USB charging port
• 360 degree sound
• ac or battery power
• built-in charger
• compatible with PACKOUT system

tool only

2688-20

M18 COMPACT HEAT GUN

• 7 second heat up time
• 40+ connects heated on 5.0 amp lithium bettery

tool only

2641-20 / 21CT

M18 CAULKING & ADHESIVE GUN

• 10oz carriage
• 200 tubes of adhesive per charge
• variable dial & trigger
• constant flow technology

bare tool & kit

kit includes 1.5 amp lithium battery, charger

*optional 20 oz carriage in-stock

2642-21CT

M18 20 OZ ALUMIUM BARREL CAULKING & ADHESIVE GUN

• 20 oz sausage style tube 
• compatible w/10 oz & 20 oz carriages
• variable dial & trigger
• constant flow technology

bare tool & kit

kit includes 1.5 amp lithium battery, charger

*optional 20 oz carriage in-stock

2646-22CT

M18 2-SPEED GREASE GUN

• 10,000 psi operating pressure
• LED light
• 2-speed – max flow or max pressure
• 48″ flex hose
• up to 10 grease cartridges per charge

kit includes (2)1.5 amp lithium batteries, charger & case

2635-20

M18 18 GAUGE DOUBLE CUT SHEAR

• 18 gauge steel or 20 gauge stainless
• 360 degree rotation head
• variable speed trigger

bare tool

0886-20

M18 JOBSITE FAN

• up to 17 hours run time on 5.0 lithium battery
• 120 degree adjustable head
• 3 speed settings
• ac or battery power

bare tool

0880-20

M18 2-GALLON WET/DRY VACUUM

• certified HEPA filter
• 30+ minutes run time on 9.0 high demand lithium battery
• on-board storage
• 45 cfm
• 32″ static water lift
• built-in blower port

bare tool

0885-20

M18 3-IN-1 BACKPACK VACUUM

• wear, hang or carry design
• 76dB noise level
• HEPA certified filter
• cyclonic 1 gallon storage canister
• dry debris
• OSHA approved for silica

bare tool includes 6′ hose, telescoping wand, crevice tool, floor tool 

0970-20

M18 FUEL PACKOUT WET/DRY VACUUM

• certified washable HEPA filter
• 30+ minutes run time on 8.0 high demand lithium battery
• on-board storage
• 50 cfm
• 47″ static water lift
• built-in blower port

bare tool

optional 49-90-2016 fleece bag available to order

2771-20

M18 TRANSFER PUMP

• self priming water pump
• up to 18′ water lift
• up to 240 gallons per charger on 5.0 lithium battery

bare tool

2840-20

M18 FUEL COMPACT QUIET COMPRESSOR

• 2 gallon air tank
• 68 dB(A) noise rating
• 1.2 scfm @ 90 psi
• oil free
• 31.2 lbs

0884-20

M18 COMPACT BLOWER

• 100 cfm & 160 mph
• 3-speed switch
• 20-1/2″ long
• 2.6 lbs

bare tool

2648-20

random orbital sander

• 5″ 8 hole hook and loop backing pad
• 7,000 to 12,000 OPM
• approx. 35 minutes run time with 3amp battery
• 3/32″ orbit

bare tool

2623-20   (manual)

3-1/4″ hand plane

• double edge carbide planer knives
• chip ejection from either side of tool
• up to 27/64″ rabbet depth 
• 6.15 lbs

bare tool

48-22-8450

TOOL CASE W/CUSTOMIZABLE INSERT

48-22-8424

TOOL BOX

48-22-8425

LARGE TOOL BOX

48-22-8429

XL TOOL BOX

48-22-8426

ROLLING TOOL BOX

48-22-8428

ROLLING TOOL CHEST

48-22-8442

2-DRAWER TOOL BOX

48-22-8443

3-DRAWER TOOL BOX

48-22-8440

CRATE

48-22-8422

COMPACT TOOL BOX

48-22-8436

LOW-PROFILE COMPACT ORAGINZER

48-22-8431

LOW-PROFILE ORGANIZER

48-22-8435

COMPACT ORGANIZER

48-22-8430

ORGANIZER

48-22-8432

DEEP ORGANIZER

48-22-8302

COOLER

48-22-8315

15″ TOTE

48-22-8320

20″ TOTE

48-22-8485

MOUNTING PLATE

48-22-8480

RACKING KIT

48-22-8410

DOLLY

48-22-8415

2-WHEEL CART

48-22-8488

CUSTOMIZABLE WORK TOP

Don’t forget

0970-20 M18 packout vacuum listed above

2950-20 M18 packout radio + charger + bluetooth listed above

2527-20/21  (manual)  (parts)

M12 FUEL HATCHET 6″ PRUNING SAW

• power to cut up to 3″ hardwoods
• up to 120 cuts per charge
• variable speed trigger
• 4.1 lbs

bare tool

kit includes (1)4 amp XC lithium battery, charger, Oregon                          bar & chain & bar cover

2727-21HD  (manual)  (parts)

M18 FUEL 16″ CHAINSAW

• approx 150 cuts per charge (HD12.0 amp lithioum battery)
• full throttle in 1 second
• variable speed trigger

kit includes (1)HD12.0 lithium battery, 16″ Oregon bar & chain & charger

2724-21HD  (manual)  (parts)

M18 FUEL BLOWER

• 450 cfm & 120 mph
• 2-speed switch
• power to clear from 15′
• 4.9 lbs

kit includes (1)8 amp XC lithium battery & charger

2825-21ST  (manual)

M18 FUEL STRING TRIMMER W/QUIK-LOK

• full throttle under 1 second
• accepts multiply attachments – edger, hedge trimmer, etc.
• variable speed trigger
• 14″ to 16″ cutting swath

includes QUIK-LOK power head, string trimmer attachment, (1)8amp battery & rapid charger

2825-21PS  (manual)

m18 fuel 10″ pole saw kit w/ QUIK-LOK

• 10″ bar length
• .043 x 3/8″ low profile chain pitch
• 84″ over all length
• 12.7 lbs.

includes Quik-Lok power head, 3′ attachment extension, 10″ pole saw attachment, (1) 8amp battery, rapid charger, oregon bar and chain

49-16-2717

QUIK-LOK string trimmer attachment

• 14″ cut swath for run time
• 16″ max capacity
• works with the QUIK-LOK power head 

1660-6

1/2″ COMPACT DRILL

• 7 amp motor
• 450 rpm
• 4″ hole saw
• 1-1/2″ auger bit
• 3″ selfeed bit
• 11.4 lbs

1680-21

1/2″ SUPER HAWG

• 13 amp motor
• 450-1,750 rpm
• 1/2″ twist bit
• 1-1/2″ auger bit
• 4-5/8″ selfeed bit
• clutch in low gear
• 14.7 lbs

6790-20

SELF DRILL FASTENER SCREWDRIVER

6791-21 REMODELER’S SCREWDRIVER KIT

• 6.5 amp motor
• 2,500 rpm
• adjustable nose cone
• 10′ cord
• 3.7 lbs

kit includes (2) adjustable nose cones, bits & metal case

6742-20

DRYWALL SCREWDRIVER

• 6.5 amp motor
• 4,000 rpm
• adjustable nose cone
• 10′ cord
• 3.5 lbs

6390-21

7-1/4″ TILT-LOK CIRCULAR SAW

• 15 amp motor
• blade RIGHT of saw
• 2-7/16″ depth of cut @ 90 degrees
• 1-13/16″ depth of cut @ 45 degrees

includes case

6391-21

7-1/4″ TILT-LOK CIRCULAR SAW

• 15 amp motor
• blade LEFT of saw
• 2-7/16″ depth of cut @ 90 degrees
• 1-13/16″ depth of cut @ 45 degrees

includes case

6470-21

10-1/4″ CIRCULAR SAW

• 15 amp motor
• blade right of saw
• 3-13/16″ depth of cut @ 90 degrees
• 2-3/4″ depth of cut @ 45 degrees

includes case

6370-21

8″ METAL CUTTING SAW

• 15 amp motor
• blade right of saw
• 2-9/16″ depth of cut @ 90 degrees
• 3,700 rpm
  
  

includes case

6538-21

ORBITAL SUPER SAWZALL RECIP SAW KIT

• 15 amp motor
• 1-1/4″ blade stroke length
• QUIK-LOK blade clamp
• variable speed trigger & dial

includes case

6268-21

TOP HANDLE ORBITAL JIG SAW

• 6.5 amp motor
• LED light
• variable speed trigger
• 1″ stroke length

includes case

6242-6

COMPACT BAND SAW

• 3-1/4″ cut capacity
• 16″ tool length
• 200 – 360 variable speed dial
• LED work light
• 9.5 lbs

6232-21

DEEP CUT BAND SAW KIT

• 5″ cut capacity
• 0 – 380 variable speed dial
• CPT – constant power technology
• all metal gears + clutch
• LED light
• 14.5 lbs

6140-31

4-1/2″ SMALL ANGLE GRINDER

• 7.5 amp motor
• large paddle switch
• 6.52 lbs

6121-30

4-1/2″ SMALL ANGLE GRINDER

• 11 amp motor
• trigger grip
• over load protection
• electronic clutch

6124-30

5″ SMALL ANGLE GRINDER

• 13 amp motor
• trigger grip (lock-on feature)
• over load protection
• electronic clutch

6141-31

4-1/2″ SMALL ANGLE GRINDER

• 11 amp motor
• large paddle switch(no-lock on feature)

6143-31

4-1/2 – 5″ SMALL ANGLE GRINDER

• 11 amp motor
• large paddle switch(no-lock on feature)
• motor brake
• electronic clutch

6146-33

4-1/2″ SMALL ANGLE GRINDER

• 11 amp motor
• large paddle switch(lock-on feature)
• over load protection
• electronic clutch

6161-30

6″ SMALL ANGLE GRINDER

• 13 amp motor
• large paddle switch(lock-on feature)
• over load protection
• electronic clutch
• soft start

6088-30

7 – 9″ LARGE ANGLE GRINDER

• 15 amp motor (AC/DC)
• trigger grip(lock-on feature)
•  

5192

LONG NECK DIE GRINDER

• 4.5 amp motor (AC/DC)
• 21,000 rpm
• 1/4″ collet(will accept 1/8″ collet)
• up to 2″ diameter reinforced wheels
• single speed

5196   (manual)

11 amp DIE GRINDER

• 11 amp motor (AC/DC)
• 14,500 rpm
• 1/4″ & 1/8″ collets
• 7.8 lbs.

6101

BANDFILE

• 5.5 amp motor
• 1/2″ x 18″ arm
• 180 degree arm adjustment

8975-6

DUAL TEMP HEAT GUN

• 570 & 1000 temp range
• 3-position rocker switch
• 1.8 lbs

8977-20

VARIABLE TEMP HEAT GUN

• 100 – 1,040 temp range
• dial temp select control
• 1.8 lbs

8988-20

VARIABLE TEMP HEAT GUN

• LCD display
• 110 – 1150 temp range
• dual fan speed
• 2.8 lbs

5615-21

BODYGRIP ROUTER KIT

• 1-3/4 MAX hp motor (11 amps)
• linear depth adjustment
• 24,000 rpm single speed
• optional wrench for above the table adjustment when mounted in a table

kit includes 1/4″ & 1/2″ collets, wrenches & carry case

5619-20

D-HANDLE ROUTER

• 1-3/4 MAX hp motor (11 amps)
• linear depth adjustment
• 24,000 rpm single speed
• trigger grip
• optional wrench for above the table adjustment when mounted in a table

kit includes 1/4″ & 1/2″ collets & wrenches

5625-20

FIXED BASE PRODUCTION ROUTER

• 3-1/2 MAX hp motor (15 amps)
• linear depth adjustment
• 10,000 – 22,000 rpm variable dial
• wrench for above the table adjustment when mounted in a table
• optional 1/4″ collet

kit includes 1/2″ collet, wrenches & t-handle wrench