Bosch

GPL100-30G  (manual)

green self leveling 3 dot laser

• +/- 1/4″@100′
• up to 100′ working range
• plumb and level dots

includes base, batteries & case

GPL100-50G  (manual)

green self leveling 5 dot laser

• +/- 1/4″@100′
• up to 100′ working range
• plumb, level and square dots

includes base, batteries & case

GLL-55 (manual)

red self leveling cross line laser

• +/- 1/8″@33′
• up to 50′ working range
• vertical & horizontal line

GLL100-40G  (manual)

green self leveling cross line laser

• +/- 1/8″@30′
• up to 100′ working range
• vertical & horizontal green line 

includes mount, ceiling clip, target, pouch, batteries & case

GCL100-40G  (manual)

green self leveling cross line w/plumb dots laser 

• +/- 1/8″@30′ for lines
• +/- 9/32″@30′ for plumb dots
• up to 100′ working range
• up to 165′ working range with receiver (sold separately – LR8) 

includes mount, ceiling clip, target, pouch & case

GTL3  (manual)

red 3 line wall & floor laser

• manual level
• 0, 45 & 90 degree line options
• up to 65′ working range

includes positioning plate, target, batteries & pouch

LR8  (manual)

red/green line laser receiver

• extends red and green laser range outdoors
• GLL3-330CG range extends to 330′
• backlit LCD display
• visual and audio indicators

includes quick-mounting bracket, (2)AA batteries & belt                       pouch

‘

GSR12V-140FCB22   (manual)

Chameleon 5 in 1 flexiclick drill/driver kit

•  265 in. lbs. torque
• 2-speed gear box
• clutch settings
• 5.2″ in length
• 1.4 lbs.

includes 3/8″ keyless chuck, locking bit holder, offset angle attachment, right angle attachment, (2) 2amp lithium batteries, charger & bag

PS41-2A  (manual)

1/4″ quick change impact driver kit

• 930 in/lbs torque
• 5.39″ long tool
• (2)batteries, charger & bag

GLL3-330GC   (app video)  (manual)

12v 3 x 360 degree green line laser

• +/- 3/32″@30′
• up to 200′ working range
• 2x vertical & 1x horizontal 360 degree lines

includes 12v battery, charger, base, target, battery adapter, pouch & case

GSB18V-755CN  (manual)

1/2″ brushless hammer driver drill (bare tool)

• 755 in/lbs torque
• kick-back control
• connect ready bluetooth ready(optional)
• 3.5 lbs.

HTH181-01  (manual)

1/2″ heavy duty impact wrench (bare tool)

• 500 ft/lbs torque
• detent pin
• 5.2 lbs w/o battery

CCS180B  (manual)

6-1/2″ circular saw (bare tool)

• 3,900 rpm no load speed
• 2″ max cut at 90 degrees
• 1-9/16″ max cut at 45 degrees

GKS18V-25GCN

7-1/4″ PROFACTOR circular saw – track ready base

• 2,500 – 5,000 rpm (6 speed settings)
• 2-1/2″ depth of cut at 90
• 1-5/8″ depth of cut at 50
• electric brake
• dust port w/blower
• ECO mode
• 9.5 lbs.

includes 7-1/4″ 24t blade

CRS180B  (manual)

1-1/8″ stroke reciprocating saw (bare tool)

• one handed blade change
• 2-speed w/ variable trigger
• 17.4″ long tool
• 6.35 lbs

PLH181B  (manual)

3-1/4″ hand plane (bare tool)

• single blade cutter head
• bi-directional chute chute
• upto 1/16″ depth of cut

GBH18V-26DK25  (manual)

1″ brushless “D” handle SDS-plus rotary hammer

• 1.9 ft/lbs impact energy
• 2-5/8″ thin wall core bit
• 17.5″ length
• 5.8 lbs

includes (2)4.0amp lithium batteries, charger, depth gauge, side handle & case

GBH18V-26K24A  (manual)

1″ “bulldog” rotary hammer kit

• 1.9 ft/lbs impact energy
• 2-5/8″ thin wall core bit
• 13.7″ length
• 8.4 lbs

includes (2)8.0amp lithium batteries, charger, depth gauge, side handle & case

GDE18V-26DB15  (manual)

HEPA dust extractor for rotary hammers

• dust capacity (20 – 1/2″ holes 2″ deep)
• 5/32 – 1″ diameter bit 
• upto 10″ bit length 
• 3.64 lbs

includes (1) 4.0amp lithium battery, charger, 5/8″ dust eye, 1″ dust eye, 4″ extension, HEPA filter & carry bag

works with 11255VSR, RH228VC, GBH18V & GBH2-28L 

JS470E  (manual)

7.0amp top handle jig saw

• 1″ stroke length
• “T” shank blades

JS572EK  (manual)

7.2amp top handle deluxe jig saw

• 1″ stroke length
• “T” shank blades
• LED lights

JS572EBK  (manual)

7.2amp barrel grip deluxe jig saw

• 1″ stroke length
• “T” shank blades
• LED lights

CM8S  (manual)

8-1/2″ single bevel sliding miter saw

• 12 amp motor
• 2-3/4″ x 12-1/4″ @ 0/0 max cut
• 37 lbs

CM10GD  (manual)

10″ dual bevel glide miter saw

• 15 amp motor
• 3-1/8″ x 12″ @ 0/0 max cut
• 64 lbs

GCM12SD  (manual)

12″ dual bevel glide miter saw

• 15 amp motor
• 3-1/2″ x 13-1/2″ @ 0/0 max cut
• 65 lbs

4100XC-10  (saw manual)   (stand manual)

10″ work site table saw w/gravity rise stand

• 15 amp motor
• 3-1/8″ max depth of cut
• 30″ rip capacity w/fence
• dado set optional
• 94 lbs w/stand

PL1632  (manual)

3-1/4″ planer kit

• single blade cutter head
• 6.5 amp motor
• single direction dust chute

PL2632K  (manual)

3-1/4″ planer kit

• double blade cutter head
• 6.5 amp motor
• bi-directional dust chute 

GSS20-40  (manual)

1/4 sheet palm orbital sander

• 2 amp motor

ROS20VSC  (manual)

5″ 8 hole random orbit palm sander w/bag

• 2.5 amp motor
• 2.5 mm pad orbit diameter

GEX33-5N  (manual)

5″ multi-hole random orbit sander/polisher

• 3.3 amp motor
• 5 mm pad orbit
• 4,500 – 12,000 opm.
• 5.1 lbs.

includes dust canister

GEX34-6N  (manual)

6″ multi-hole random orbit sander/polisher

• 3.3 amp motor
• 4 mm pad orbit diameter
• anti-vibration suspension system
• 5,500 – 12,000 opm.
• 5.3 lbs.

includes dust canister

GET75-6  (manual)

6″ 6 hole dual mode random orbit sander

• 7.5 amp motor
• 9 mm pad orbit diameter
• direct drive to standard random orbit switch

GWS8-45  (manual)

4-1/2″ slim body angle grinder

• 7.5 amp motor
• slide switch
• 11,000 rpm.
• 4.2 lbs.

1375A  (manual)

4-1/2″ angle grinder

• 6 amp motor
• slide switch
• 11,000 rom.
• 3.75 lbs.

GWS10-45E  (manual)

4-1/2″ ergonomic angle grinder

• 10 amp. motor
• slide switch
• 11,000 rpm.
• 4.3 lbs.

GWS10-45PE  (manual)

4-1/2″ ergonomic angle grinder

• 10 amp motor
• paddle switch
• 11,000 rpm.
• 4.4 lbs.

GWS13-50VS  (manual)

5″ 13 amp angle grinder

• variable speed dial
• slide switch

GWX10-45E  (manual)

4-1/2″ 10 amp X-LOCK angle grinder

• slide switch
• quick lock wheel change

GWX10-45DE  (manual)

4-1/2″ 10 amp X-LOCK angle grinder

• paddle switch
• quick lock wheel change

GWX13-50VS  (manual)

5″ 13 amp X-LOCK angle grinder

• variable speed dial
• slide switch
• quick lock wheel change

GKF125CE  (manual)

1.25 hp variable speed palm router

• 7 amp motor
• 1/4″ collet

GKF125CEPK  (manual)

1.25 hp variable speed palm router kit

• 7 amp motor
• 1/4″ collet
• fixed & plunge base w/case

1617EVS  (manual)

2.25 hp variable speed fixed base router

• 12 amp motor
• 1/4″ & 1/2″ collets

1617EVSPK  (manual)

2.25 hp variable speed router combo kit

• 12 amp motor
• 1/4″ & 1/2″ collets
• fixed & plunge base w/case

MRF23EVS  (manual)

2.3 hp variable speed fixed base router

• 15 amp motor
• 1/4″ & 1/2″ collets
• trigger control in base

MRP23EVS  (manual)

2.3 hp variable speed plunge base router

• 15 amp motor
• 1/4″ & 1/2″ collets
• trigger control in base

MRC23EVSK  (manual)

2.3 hp variable speed combo router kit

• 15 amp motor
• 1/4″ & 1/2″ collets
• trigger control in base
• fixed and plunge base w/case

11255VSR  (manual)

1″ sds+ “BULLDOG Xtreme” rotary hammer

• 8 amp motor
• 2 ft/lbs impact energy
• 6.7 lbs

GBH2-28L  (manual)

1-1/8″ sds+ “BULLDOG Xtreme Max” rotary hammer

• 8.5 amp motor
• 2.4 ft/lbs impact energy
• 6.9 lbs

RH328VC  (manual)

1-1/8″ sds+ rotary hammer

• 8 amp motor
• 2.6 ft/lbs impact energy
• 7.7 lbs

RH540M  (manual)

1-9/16″ sds-max rotary hammer

• 12 amp motor
• 6.1 ft/lbs impact energy
• 15.2 lbs

RH540S  (manual)

1-9/16″ spline rotary hammer

• 12 amp motor
• 6.1 ft/lbs impact energy
• 15 lbs

11264EVS  (manual)

1-5/8″ sds-max rotary hammer

• 13 amp motor
• 6.5 ft/lbs impact energy
• 15.2 lbs

RH745  (manual)

1-3/4″ sds-max rotary hammer

• 13.5 amp motor
• 8.2 ft/lbs impact energy
• 18.5 lbs

RH850VC  (manual)

1-7/8″ sds-max rotary hammer

• 13.5 amp motor
• 9.3 ft/lbs impact energy
• 19.7 lbs

11316EVS  (manual)

sds-max demo hammer

• 14 amp motor
• 4.4 – 12.4 ft/lbs impact energy
• 22.5 lbs

DH1020VC  (manual)

sds-max demo hammer

• 15 amp motor
• 17 ft/lbs impact energy
• 25.1 lbs

11335K  (manual)

jack breaker hammer

• 15 amp motor
• 1-1/8″ tool holder
• 22 ft/lbs impact energy
• 38 lbs

VAC090AH  (manual)

9 gallon auto filter clean HEPA dust extractor

• 9.5 amp motor
• 150 cfm
• 97.3 static water lift
• variable speed dial
• auto filter cleaning system
• 22.6″ height
• 28 lbs.

VAC140AH  (manual)

14 gallon auto filter clean HEPA dust extractor

• 9.5 amp motor
• 15o cfm
• 97.3 static water lift
• variable speed dial
• auto filter cleaning system
• 34.1″ height w/handle
• 38 lbs.