Makita

XSF03Z  (manual)  (flyer)  (parts)

brushless screw driver

• 4,000 rpm
• push drive
• 3.8 lbs w/battery

bare tool

XAD02Z  (manual)  (flyer)  (parts)

3/8″ angle drill

• 3-1/2″ head height
• 121 in lbs torque
• 4-pole motor
• 4 lbs w/battery

XPH12Z  (manual)  (flyer)  (parts)

1/2″ brushless compact hammer driver-drill

• 530 in lbs torque
• 4 lbs w/battery

(bare tool)

XPH14Z / TB  (manual)  (flyer)  (parts)

1/2″ brushless H.D. hammer driver-drill

• 1,250 in lbs torque
• LED light
• 2-speed gear box
• 6 lbs w/battery

(bare tool)

XAD03PT  (manual)  (flyer)  (parts)

2X 18v brushless 1/2″ 2 speed right angle drill

• 4-5/8″ self feed bit
• 6-1/4″ hole saw
• built-in clutch
• 14 lbs w/batteries

kit includes (2)5.0 batteries, charger & bag

 new *XDT18ZB*

XDT15ZB  (manual)  (flyer)

1/4″ sub-compact brushless impact driver

• 1,240 in lbs torque
• assist mode – prevents cam out and cross threading
• 2-variable speed modes
• LED light
• 2.6 lbs

bare tool

XST01Z  (manual)  (flyer)  (parts)

1/4″ brushless oil-impulse 3-speed impact driver

“Oil-Impulse™ Technology utilizes oil to hydraulically drive the impact mechanism for lower noise and increased efficiency”

• 355 in./lbs. torque
• 0-1,200, 1-2,000, 0-3,200 rpm
• 3.2 lbs w/battery

bare tool

XDT16Z  (manual)  (flyer)  (parts)

1/4″ brushless quick-shift mode 4-speed impact driver

• 1,600 in lbs torque
• assist mode – start slow then speeds up
• 2-tightening modes for self drilling screws
• reverse auto-stop
• 3.4 lbs w/battery

bare tool

XWT15Z  (manual)  (parts)

1/2″ square drive compact brushless impact wrench

• 210 ft lbs torque
• 295 ft lbs nut busting torque
• 3 speeds
•  3.8 lbs w/battery

bare tool

XWT17Z  (manual)  (flyer)  (parts)

1/2″ mid-torque 4-speed brushless impact wrench

• 520 ft. lbs. fastening torque
• 740 ft. lbs. nut busting torque
• friction ring
• 6 lbs. w/battery

bare tool

XWT08Z  (manual)  (flyer)  (parts)

1/2″ square drive w/ friction ring brushless impact wrench

• 740 ft lbs torque
• 1,180 ft lbs nut busting torque
• 3 speeds
• 7.9 lbs w/battery

bare tool

kit includes (2)5.0 batteries, charger & bag

XWT09Z  (manual)  (flyer)  (parts)

7/16″ hex brushless high-torque impact wrench

• 590 ft lbs torque
• 3 speeds
• 8.1 lbs w/battery

bare tool

CX202RB  (flyer) 

sub-compact brushless 2pc kit

• XPH11 hammer driver-drill  (manual)  (parts)
  • 350 in lbs torque
  • 2.8 lbs w/battery
• XDT15  impact driver  (manual)  (parts)
  • 1,240 in lbs torque
  • 2.6 lbs w/battery

kit includes (2)2.0 batteries, charger & bag

XT269M  (flyer)

compact brushless 2pc kit

• XPH12Z  (manual)  (parts)
  • 530 in lbs torque
  • 4.2 lbs w/battery
• XDT13Z  (manual)  (parts)
  • 1,500 in lbs torque
  • 3.3 lbs w/battery

kit includes (2)4.0 batteries, charger & case

XT288T  (flyer)

brushless hammer driver drill & impact driver kit

• XPH14 1/2″ hammer driver drill  (manual)  (parts)
  • 1,250 in lbs torque
  •  
  • 6 lbs with battery
• XDT16 1/4″ impact driver  (manual)  (parts)
  • 1,600 in lbs torque
  • 4-speed power selection
  • 3.4 lbs with battery

kit includes (2) 5 amp lithium batteries, charger & bag

XT255T  (flyer)

drywall installer 2pc kit

• XSF03Z  (manual)  (parts)
  • 4,000 rpm
  • push drive
  • 3.8 lbs w/battery
• XOC01Z  (manual)  (parts)
  • 30,000 rpm
  • 3.7 lbs w/battery

kit includes (2)5.0 batteries, charger & bag

XSC03Z  (manual)  (flyer)  (parts)

5-3/8″ metal cutting circular saw

• 2″ cut capacity
• chip collector
• S.S. base
• 6 lbs w/battery

bar tool

XSH04ZB  (manual)  (flyer)  (parts)

6-1/2″ sub-compact brushless circular saw

• blade right
• 2-1/4″ @ 90 cut capacity
• brake
• 6.4 lbs w/2.0 compact battery

bare tool

XSH03Z  (manual)  (flyer)  (parts)

6-1/2″ brushless circular saw

• 2-1/4″ @ 90 cut capacity
• 7.3 lbs w/battery

bare tool

XSH06PT  (manual)  (flyer)  (parts)

2X 18v 7-1/4″ brushless circular saw

• 2-5/8″ @ 90 cut capacity
• 6,000 rpm
• 10.5 lbs w/battery

kit includes (2)5.0 batteries, charger & bag

XSR01PT  (manual)  (flyer)  (parts)

2X 18v 7-1/4″ brushless rear handle circular saw

•  2-5/8″ @ 90 cut capacity
• 4,800 rpm
• 10.1 lbs w/batteries

bare tool

XSL06PT  (manual)  (flyer)  (parts)

2X 18V 10″ sliding dual bevel miter saw kit

• 2-13/16″x12″ @ 90 cut capacity
• 6-5/8″ nested crown capacity
• 60.2 lbs w/batteries

kit includes (2)5.0 batteries, charger & blade

XVJ03Z  (manual)  (parts)

brushed motor jig saw

• 0-2,600 strokes per minute
• 3 orbital settings
• tool-less blade change
• LED light
• bevel base
• 6.4 lbs with battery

bare tool

XVJ02Z  (manual)  (flyer)  (parts)

brushless jig saw

• 800-3,500 strokes per minute
• 1″ stroke length
• variable speed trigger and dial
• LED light
• tool-less blade change
• up to 50% more run time
• 5.8 lbs with battery

bare tool

XDS01Z  (manual)  (flyer)  (parts)

18v cordless cut-out tool

• 1-3/16″ cut capacity
• 1/4″ stroke length
• drywall or wood blade options available
• 4.2 lbs w/battery

bare tool

XRJ07ZB  (manual)  (flyer)  (parts)

18v sub-compact brushless recipro saw

• 13/16″ stroke length
• 12-1/2″ tool length
• 5.7 lbs w/battery

bare tool

XRJ05Z  (manual)  (parts)

18v brushless recipro saw

• 1-1/4″ stroke length
• 8.2 lbs w/battery

bare tool

XBP03Z  (manual)  (flyer)  (parts)

18V compact band saw

• 2-1/2″ cut capacity
• 32-7/8″ blade length
• 9 lbs w/battery

bare tool

XBP02Z  (manual)  (parts)

18V portable band saw

• 4-3/4″ cut capacity
• 44-7/8″ blade length
• 14.3 lbs w/battery

bare tool

XRH06ZB  (manual)  (flyer)  (parts)

18v sub-compact sds-plus brushless rotary hammer

• 11/16″ max drill capacity
• .88 ft/lbs impact energy
• 4.6 lbs w/battery

XRH05Z  (manual)  (parts)

2X 18V sds-plus rotary hammer

• 1″ max drill capacity
• 2.2 ft/lbs impact energy
• 9.3 lbs w/batteries

bare tool

XCC01Z  (manual)  (flyer)  (parts)

5″ brushless wet/dry masonry saw (bare tool)

• up to 1-9/16″ depth of cut at 90 degrees
• integrated water delivery system
• auto speed change
• electric brake
• optional dust port (sold separately)
• AWS auto-start wireless system (transmitter sold separately)
• 6.6 lbs. with battery

includes diamond blade, water supply kit & wrench

XEC01Z   (manual)   (flyer)  (parts)

9″ 2X 18v brushless power cutter (bare tool)

• 3-1/2″ depth of cut at 90 degrees
• integrated water delivery system
• active feed back sensing
• electric brake
• LED light
• overload protection
• 9″ x 7/8″ arbor
• 13.7 lbs. with batteries

includes water hose coupler, 9″ 36 grit cut-off wheel & 9″                     diamond general purpose wheel

XAG04Z  (manual)   (flyer)  (parts)

18V 4-1/2 / 5″ angle grinder

• brushless motor
• anti-bind system
• 5.6 lbs

bare tool

XAG20Z  (manual)   (flyer)  (parts)

18V 4-1/2 / 5″ angle grinder w/ brake

• variable speed
• anti-bind system
• brushless motor
• 5.7 lbs

bare tool

XAG25Z  (manual)   (flyer)  (parts)

18V 4-1/2″ / 5″ X-LOCK angle grinder

• brushless motor
• NEW quick change accessory system
• LED light
• AFT brake
• soft start
• 6.6 lbs

bare tool

XTR01Z  (manual)  (flyer)  (parts) 

18V brushless compact router

• 10,000 – 30,000 rpm
• dual LED lights
• 1/4″ & 3/8″ collets

bare tool

XPK01Z (manual)  (parts)

18V 3-1/4″ hand plane

• 2-blade cutter head
• 2 sided carbide knives
• 7.4 lbs w/battery

bare tool

XPK02Z   (flyer)   (manual)  (parts)

18V 3-1/4″ hand plane with AWS

• 2-blade cutter head
• 2 sided carbide knives
• up to 1″ deep rabbet
• AWS – wireless auto start for vacuum
• chip ejection from either side of tool
• 7.8 lbs w/battery

bare tool

XOB01Z  (manual)  (parts)

18V brushless 5″ random orbit sander

• 1/8″ orbit
• 3-speed control
• 8 hole hook & loop pattern

bare tool

XOC01Z  (manual)  (flyer)  (parts)

18V cut-out tool

• 30,000 rpm
• accepts 1/8 & 1/4″ collets
• 3.7 lbs w/battery

bare tool

(1/8″ collet included)

XNJ01Z  (manual)  (parts)

18V nibbler

• 16 gauge max steel cut capacity
• 2″ cut radius
• 4.8 lbs. w/battery

bare tool

XLS01T  (manual)  (flyer)  (parts)

18V brushless drywall sander kit

• 8-7/8″ sanding pad
• 16-1/2″ built-in extension
• 10.7 lbs. w/battery

kit includes (2)5.0 batteries, charger & bag

XMT03Z  (manual)  (flyer)  (parts)

18V multi-tool

• 2-3/8″ small body diameter
• quick blade change
• multi brand blades accepted
• 4.9 lbs. w/battery

bare tool

XMT04ZB   (manual)  (flyer)  (parts)

brushless StarlockMax multi-tool (bare tool)

• 10,000-20,000 opm.
• soft start
• anti-vibration technology – 85% reduced
• StarlockMax, StarlockPlus and Starlock compatible accessories
• 3.7 lbs. with battery

XRM06B  (manual)  (flyer)  (parts)

12v/18v bluetooth job site radio

• Bluetooth, 3.5mm aux port
• side firing speaker
• bottom subwoofer
• up to 35 hour run time with 5amp 18v battery
• runs off 12v, 18v batteries or 120v plug

*not a charger*

XRM09Z  (manual)  (flyer)  (parts)

12V/18V job site radio

• Bluetooth, 3.5mm aux port
• USB charging port
• side firing speaker
• bottom subwoofer
• up to 18 hour run time with 5amp 18v battery
• runs off 12v, 18v batteries or 120v plug

*not a charger*

XRM10  (manual)  (flyer)  (parts)

18v/12v bluetooth jobsite charger / radio

• Bluetooth, 3.5mm aux port
• USB charging port
• side firing speaker
• charges 18v 5amp battery in 80 minutes
• up to 18 hour run time with 5amp 18v battery
• runs off 12v, 18v batteries or 120v plug

bare tool

XBU06Z  (manual)  (flyer)  (parts)

18v floor blower

• 152 mph
• 113 cfm
• 3-speed selector
• up to 18 minute continuous run time with 5amp battery
• 4.3 lbs with battery

bare tool

XBU02PT  (manual)  (flyer)  (parts)  

2X 18V brushless blower kit

• 473 cfm @ 120 mph
• 6-speed
• 9 lbs.

kit includes (4)5.0 amp batteries, charger

DCF301Z  (manual)  (flyer)  (parts)

18V 13″ job site oscillating fan

• 740 cfm
• 3-stage timer – 1,2 & 4 hours
• 3-speed
• 5.7 hour run time (low w/5.0 battery)

bare tool

DML812  (manual)  (flyer)  (parts)

18V LED flashlight / spotlight

• 4-mode operation
  • 600 lumen spot
  • 1,000 lumen flood
  • 1,250 lumen spot/flood
  • 1,200 lumen strobe
• 90 degree pivoting head

bare tool

DML811  (manual)  (flyer)  (parts)

18V cordless/corded LED work light

• 3-mode operation
  • 750 lumen low
  • 1,500 lumen medium
  • 3,000 lumen high

bare tool

XLC02ZB   (manual)   (flyer)  (parts)

18v compact vacuum

• 46 cfm
• up to 33 minutes run time
• 1.3 pint capacity
• 2-stage filter system
• 3.2 lbs. w/ battery

bare tool includes 8″ nozzle, 6″ crevice nozzle, nozzle                             holder & extension

XLC04ZBX4   (manual)   (flyer)  (parts)

18v compact brushless vacuum

• 53 cfm – 3-speed motor
• up to 83 minutes run time
• 1.6 pint capacity
• 2-stage filter system
• 2.7 lbs. w/ battery

bare tool includes 8″ nozzle, 6″ crevice nozzle, nozzle                             holder & extension

XCV11Z    (manual)  (flyer)  (parts)

18v portable HEPA wet/dry dust extractor/vacuum

• 57 cfm w/27″ water lift
• 2 gallon storage
• up to 60 minutes continuous run time
• 76 decibels
• 10.1 lbs. w/battery

bare tool includes 5″ upholstery nozzle, 1″ x 6.5′ anti-static                    hose & 7″ crevice nozzle 

OSHA silica compliance catalog

XCV08Z   (manual)  (flyer)  (parts)

2X 18V 2.1 gallon HEPA dust extractor

• 74 cfm w/39″ water lift
• 40 minutes on high w/(2) 5.0 batteries
• 18.4 lbs. w/batteries

bare tool

XCV09Z  (manual)  (flyer)  (parts)

18v X2 brushless 1/2 gallon HEPA backpack dry vacuum

• up to 116 minutes continuous use w/(2) 5amp batteries
• 70 cfm
• 44″ water lift
• 2-stage HEPA filter system
• LED light
• 9.9 lbs. with batteries 

includes 1″x 39″ anti-static hose, aluminum telescoping                       wand, 11″ floor nozzle, harness, crevice tool, bent                   pipe & (1) filter bag

GT200D

brushless 2-pc combo kit

• GPH01 1/2″ hammer driver-drill (manual)  (parts)
  • 1,250 in. lbs. torque
  • electronic clutch – 41/low, 21/high
  • 6 lbs with battery
• GDT01 1/4″ impact driver  (manual)  (parts)
  • 1,950 in. lbs. torque
  • 4-speed selector
  • 3.7 lbs. with battery

kit includes (2)2.5 amp 40v batteries, charger & bag 

GAD01M1  (manual)

brushless 1/2″ right angle drill

• 0 – 400/0 – 1,500 rpm
• 1/2″ keyed chuck
• LED light
• 6-1/4″ hole saw or 4-5/8″ self feed bit capacity
• built-in clutch
• soft start
• 12.8 lbs. with battery

kit includes (1)4amp battery & charger

GWT04D  (manual)

brushless 1/2″ compact impact wrench

• 465 in. lbs. nut busting torque
• 260 in. lbs. fastening torque
• 3- forward & reverse auto-stop modes
• 4-speeds 
• 4.2 lbs. with battery

kit includes (2) 2.5 amp 40v batteries, charger & bag

GSH01M1  (manual)

brushless 7-1/4″ circular saw

• 6,000 rpm
• LED light
• magnesium base, blade guard & cover
• automatic smart torque drive
• 2-5/8″ depth @ 90 degrees
• 0-56 degree bevel
• AWS capable (transmitter sold separately)
• 9.7 lbs. with battery

kit includes (1) 4 amp 40v battery, charger, blade & bag

GSR02M1  (manual)

brushless rear handle 10-1/4″ circular saw

• 4,000 rpm
• 3-3/4″ depth @ 90 degrees
• up to 150 cuts per charge in 4×4 SPF lumber with 4amp battery
• 0-56 degree bevel
• automatic smart torque drive
• AWS capable (transmitter sold separately)
• 13.3 lbs with battery

kit includes (1)4amp battery, wrench, charger & bag

GPS01M1J  (manual)

brushless 6-1/2″ plunge cut saw

• 2,500 – 4,900 rpm
• 2-3/16″ depth @ 90 degrees
• 20 mm arbor
• soft start
• electric brake
• overload, over-discharge & overheat protection
• AWS capable (transmitter sold separately)
• 11 lbs. with battery

kit includes (1)4amp battery, 56t blade, 40v charger, small interlock case & x-large interlock case

GSL03M1 (manual)  (parts)

Brushless 10″ dual-bevel sliding miter saw

• 3,600 rpm
• 2-13/16″ x 12″ cut @ 90 degrees
• 6-5/8″ nested crown molding cut
• 5-1/4″ vertical baseboard cut
• LED light-shadow cut line
• soft start
• electric brake
• AWS capable (transmitter sold separately)
• 60lbs. with battery

kit includes (1)4amp battery, vertical vise, dust bag, 45t blade & charger

GRJ01M1  (manual)

brushless recipro saw

• 1-1/4″ stroke length
• 2-speed gear box
• variable speed trigger
• LED light
• no clutch or orbital action
• 9.9 lbs. with battery

kit includes (1) 4 amp 40v battery, charger, blade & bag

GAG03M1 (manual)

brushless 4-1/2″ / 5″ angle grinder

• 8,500 rpm motor
• lock-on paddle switch
• bind-up control
• electric brake
• 7.9 lbs. with battery

kit includes (1) 4 amp battery, (1) 5″ grinding wheel, 5″                               tool-less guard, wrench, charger & bag

DA3010F  (manual)  (parts)

3/8″ angle drill

• 4 amp motor
• variable speed w/ reverse
• L.E.D. light
• 2-5/8″ x 10-5/8″ compact tool size
• keyed chuck
• built-in clutch
• 3.5 lbs.

FS2500  (manual)  (flyer)  (Parts)

Screwdriver

• 6.0 amp motor
• 0-2,500 rpm
• LED light
• 3.4 lbs

FS4200  (manual)  (flyer)  (parts)

Drywall screwdriver

• 6.0amp motor
• 0-4,000 rpm
• LED light
• 3.0 lbs

BO4556K  (manual)  (flyer)  (parts)

1/4 sheet finish sander

• 2.0 amp motor
• 4 x 4-1-2″ pad size

kit includes punch pad & case

BO4900V  (manual)  (parts)

1/2 sheet finish sander

• 2.9 amp motor
• 4-1/2 x 9″ pad size

BO5030K  (manual)  (flyer)  (parts)

5″ random orbit sander

• 3.0 amp motor
• 1/8″ orbit
• 8-hole pattern

kit includes case

BO6050J  (manual)  (flyer)  (parts)

6″ random orbit sander

• 6.6 amp motor
• 2-mode switch
• 7/32″ orbit

9031  (manual)  (parts)

1-1/8 x 21″ belt sander

• 5.0 amp motor
• variable speed
• 4.6 lbs

9903  (manual)  (parts)

3 x 21″ belt sander

• 8.8 amp motor
• variable speed
• 9.5 lbs

9920  (manual)  (parts)

3 x 24″ belt sander

• 8.8 amp motor
• variable speed
• 9.9 lbs

9404  (manual)  (parts)

4 x 24″ belt sander

• 8.8 amp motor
• variable speed
• 10.3 lbs

9237CX3  (manual)  (parts)

7″ polisher

• 7 lbs
• 10 amp motor
• variable speed

kit includes hook & loop backing pad, (2)handles, compounding bonnet, polishing bonnet & bag

SP6000J1  (manual)  (flyer)  (parts)

6-1/2″ plunge cut saw

• 12 amp motor
• 2-3/16″ @ 90 cut capacity
• 1-9/16″ @ 45 cut capacity
• 20mm arbor

includes 6-1/2″x48t blade, 55″ track & XL interlocking case

5007F  (manual)  (flyer)  (parts)

7-1/4″ 15 amp circ saw

• 2-3/8″ @ 90 cut capacity
• 1-3/4″ @ 45 cut capacity
• 2 LED lights
• 11.1 lbs

5007MGA  (manual)  (flyer)  (parts)

7-1/4″ 15 amp circ saw w/case

• 2-1/2″ @ 90 cut capacity
• 1-3/4″ @ 45 cut capacity
• 2 LED lights
• motor brake
• 10.6 lbs

5008MGA  (manual)  (flyer)  (parts)

8-1/4″ 15 amp circ saw

• 3″ @ 90 cut capacity
• 2-1/4″ @ 45 cut capacity
• motor brake
• 11.4 lbs

5104  (manual)  (flyer)  (parts)

10-1/4″ 14 amp circ saw

• 3-3/4″ @ 90 cut capacity
• 2-3/4″ @ 45 cut capacity
• motor brake
• 20.3 lbs

5402NA  (manual)  (parts)

16-5/16″ 15 amp circ saw

• 6-3/16″ @ 90 cut capacity
• 4-3/16″ @ 45 cut capacity
• 32.1 lbs

LS0815F  (manual)  (Parts)

8-1/2″ single bevel sliding miter saw

• 2-9/16 x 12″ @ 90 cut capacity
• soft start
• 31.1 lbs

LS1019L  (manual)  (flyer)  (parts)

10″ dual bevel sliding miter saw

• 2-13/16 x 12″ @ 90 cut capacity
• forward sliding motor
• dual dust ports
• 57.9 lbs

LS1219L  (manual)  (flyer)  (parts)

12″ dual bevel sliding miter saw

• 3-5/8 x 15″ @ 90 cut capacity
• forward sliding motor
• dual dust ports
• 65 lbs

WST06  (manual)  (parts)

compact folding miter saw stand

• extends up to 100-1/2″
• supports 500 lbs.
• closed size – 45-1/4″x10-3/4″x9-3/4″
• universal removeable saw mount brackets
• wheels attached
• 35.3 lbs.

4350FCT  (manual)  (parts)

top handle jig saw

• 6.3 amp
• 1″ stroke length
• LED light
• “T” shank blades

4351FCT  (manual)  (parts)

barrel grip jig saw

• 6.3 amp motor
• 1″ stroke length
• L.E.D. light
• tool-less “T” shank blade change
• variable speed dial
• electronic speed control
• 5.5 lbs.

JR3070CT  (manual)  (flyer)  (parts)

15 amp AVT recipro saw

• 1-1/4″ stroke length
• variable speed dial
• 9.7 lbs

RT0701C  (manual)  (flyer)  (parts)

1-1/4 hp compact router

• 1/4″ collet
• variable speed
• soft start
• rack & pinion depth control

RT0701CX7  (manual)

kit includes fixed & plunge bases along with an edge guide

RT0701CX3  (manual)  (parts)

1-1/4 hp compact router installer’s kit

kit includes – offset base, straight guide, trimmer base, trimmer guide, plunge base, tilt base, spanner wrenches, 1/4″ collet, dust collection for fixed & plunge base & tool bag

RF1101KIT  (manual)  (parts)

2-1/4 hp router kit

• 11 amp motor
• 1/4 & 1/2″ collets
• variable speed
• soft start

kit includes collets, fixed & plunge bases, case

RP1800  (manual)  (flyer)  (parts)

3-1/4 hp plunge router

• 15 amp motor
• 22,000 rpm
• lock-on trigger

RP2301FC  (manual)  (flyer)  (parts)

3-1/4 hp plunge router

• 15 amp motor
• variable speed
• soft start
• LED lights

HR2475  (manual)  (flyer)  (parts)

1″ SDS+ rotary hammer

• 2 ft/lbs impact energy 
• 3-mode selector
• 6.6 lbs

HR4013C  (manual)  (flyer)  (parts)

1-9/16″ SDS-MAX rotary hammer

• 8.4 ft/lbs impact energy
• 11 amp motor
• anti-vibration
• 15.1 lbs

GA4534  (manual)  (flyer)  (parts)

4-1/2″ angle grinder

• 6 amp motor
• AC/DC paddle switch
• 4.2 lbs

9005B  (manual)  (parts)

5″ angle grinder

• 9 amp motor
• AC/DC trigger switch
• 20 years proven history
• 6.6 lbs

GA5020  (manual)  (flyer)  (parts)

5″ angle grinder

• 10.5 amp motor
• AC/DC trigger switch
• electric brake
• mechanical clutch
• 5.9 lbs

9565PCV  (manual)  (flyer)  (parts)

5″ high-power paddle switch angle grinder

• 13 amp motor
• 2,800 – 10,500 rpm variable speed motor
• mechanical clutch
• soft start
• 4.2 lbs

GA7021  (manual)  (parts)

7″ angle grinder w/AC/DC switch

• 15 amp motor
• 6,600 rpm
• 5/8″-11 arbor
• lock-on trigger switch
• 12.2 lbs.

KP0800K  (manual)  (flyer)  (parts)

3-1/4″ planer

• 6.5 amp motor
• 2 double edged carbide blade cutter head
• 5.7 lbs.

1806B  (manual)  (parts)

6-3/4″ planer

• 10.9 amp motor
• 2 blade cutter head
• 19.8 lbs.

JS8000  (manual)  (parts)  (flyer)

fiber cement shear

• 6.5 amp motor
• 5/16″ cut capacity
• variable speed trigger
• 8.2′ power cord
• 4.8 lbs.

with case

JN1601   (manual)  (parts)

16 gauge nibbler

• 5 amp motor
• 2,200 strokes per minute
• 360 degree rotating die
• 10g aluminum, 16g steel, 18g stainless steel
• 3.6 lbs.

JS1602  (manual)  (parts)  (flyer)

16 gauge shear

• 3.3 amp motor
• 4,ooo strokes per minute
• 13g aluminum, 16g steel, 18g stainless steel
• 1-3/16″ cutting radius
• 3.4 lbs. 

VC4210L  (OSHA catalog)

(manual)  (flyer)  (parts)  (safety instructions)

11 gallon vacuum

• 12 amp motor
• 148 cfm / 92″ water lift
• wet/dry capable
• HEPA filter included
• AWS compatible (not included)
• interlocking case adapter plate
• variable speed dial
• 35 lbs.

includes 1-1/4″ x 13′  anti-static hose, tool adapters, fleece                   bag, plastic bag & crevice nozzle 

XRU23SM1  (spec sheet)   (manual)  (parts)

13″ brushless string trimmer

• up to 6,000 rpm
• up to 1 hour run time on 4 amp battery
• high/low with variable speed
• 6.6 lbs with battery

kit includes (1)4 amp lithium battery & charger

XRU15Z  (spec sheet)  (manual)  (parts)

18v x2 15″ brushless string trimmer kit

• 3-speed options
• automatic torque drive
• reverse rotation function
• 69-1/4″ over all length
• 10.4 lbs with batteries

bare tool

XUX01M5PT   (spec sheet)   (manual)  (parts) (parts2)

18v x2 brushless couple shaft power head kit

• 3-speed option
• variable speed trigger
• reverse rotation function
• lever lock attachment change system
• 12.5 lbs with batteries

kit includes (2) 5 amp lithium batteries, dual bay charger                          & 17″ string trimmer shaft attachment

EY401MP   (manual)  (parts)

10″ pole saw couple shaft attachment

• steel drive shaft
• translucent bar oil tank
• 10″ reversible sprocket nose bar
• 45″ over all length
• 3.35 lbs

XHU04Z   (manual)  (parts)

18v x2 25-1/2″ hedge trimmer

• 6 speed dial
• dual action double sided shear blade
• 5-position rotation rear handle
• up to 2 hour run time on 5 amp battery
• 12.2 lbs with batteries

bare tool

XCU08PT   (manual)  (flyer)  (parts)

18v x2 brushless 14″ top handle chain saw

• power equivalent to 30cc gas chain saw
• torque boost mode
• variable speed trigger
• L.E.D. light
• 10.2 lbs with batteries

kit includes (2) 5 amp lithium batteries, dual bay charger                        & 14″ bar cover

XBU03Z  (manual)  (flyer)  (partsl)

brushless blower

• 459 cfm & 116 mph
• cruise control lever
• variable speed trigger
• in-line fan design for better balance
• 6.5 lbs with batteries

bare tool

XBU02PT   (manual)  (flyer)  (parts)  

18v x2 brushless blower

• 473 cfm & 120 mph
• 6-stage air velocity/volume selection dial
• variable speed trigger
• up to 28 minutes run time on mid-speed with (2)5 amp batteries
• 61 dBA

kit includes (4) 5 amp lithium batteries, dual bay charger                          & 3-stage telescoping nozzle

AN924  (manual)  (flyer)  (parts)

21 degree pneumatic framer

• 2″ – 3-1/2″ plastic collated nails
• 70 – 120 psi
• 4.3 scfm
• trigger selector switch
• 8.3 lbs

includes fitting & rafter hook

AN613    (manual)  (flyer)  (parts)  

coil siding nailer

• 1-1/4″ to 2-1/2″ plastic and wire 15 degree collated nails
• 2-mode selector switch – contact or sequential
• 3.2 scfm required
• requires oil
• 5.1 lbs 

includes air fitting, oil, wrench & case

AF506   (manual)  (flyer)   (parts)  

18 gauge 2″ brad nailer

• 5/8″ to 2″ nail length
• 70-120 psi operating pressure
• built-in air duster
• tool-less depth adjustment
• 2.9 lbs

kit includes tool oil, no-mar tips, air fitting, case

MAC320Q       (manual)   (flyer)  (parts)     

quiet series oil-free electric compressor

• 1-1/2 hp motor (8.5 amps)
• 3 gallon tank
• 2.6 cfm @ 90 psi
• 60 decibels
• 52.5 lbs

MAC700   (manual)  (quick start)  (parts)

2HP big bore air compressor

• 2 hp max, 1.7 hp running
• 2.6 gallon tank
• 3.8 cfm @ 40 psi
• 3.3 cfm @ 90 psi
• oil lubricated pump
• 52 lbs.