Dewalt

Dw0822LG

green cross line & plumb dot laser kit

• +/- 1/8″ accuracy
• 165′ operating range with detector
• swivel base attached to laser

kit includes green lens glasses, magnetic plate, ceiling mount, target, battery, charger & t-stak case

• DW0892G green laser detector in-stock

DW089LG

green 3×360 line laser kit

• +/- 1/8″ accuracy
• 165′ operating range with detector
• swivel base attached to laser

kit includes green lens glasses, magnetic plate, ceiling mount, target, battery, charger & t-stak case

• DW0892G green laser detector in-stock

DCL510

led worklight

• 130 lumens
• 360 degree swivel light
• magnetic base

DCL077B

compact task light

• upto 2,000 lumens
• tripod mount
• daylight hue
• accepts 12v, 20v & flexvolt batteries

DCB090

12/20v USB power source

• 2 USB ports
• battery gauge

DCB127

2 amp lithium battery

DCD740B

right angle drill/driver

• 3/8″ keyless chuck
• 0-650/0-2,000 dual speed range
• 4″ head height

bare tool

*NEW*

DCD999B

brushless hammer driver/drill with FLEXVOLT ADAVANTAGE 

• 1/2″ metal chuck
• 820 UWO of power with 20v battery – 42% more power with 60V battery
• 3-speed gear box
• 11-clutch settings

bare tool

DCF620B

brushless drywall screwgun

• 4,400 rpm
• 3-depth position nose cone
• LED light 

bare tool

DCF887B

brushless impact driver

• 1/4″ quick change chuck
• 3-LED lights
• 3 speed/drive selector

bare tool

DCF894B

1/2″ mid-range detent pin impact wrench

• 330 ft lbs tightening torque
• 3-speed selector
• LED light

bare tool

DCF899B

1/2″ high torque detent pin impact wrench

• 700 ft lbs tightening torque
• 1,200 ft lbs break away torque
• 3-speed selector
• LED light

bare tool

DCF897B

3/4″ high torque hog ring impact wrench

• 700 ft lbs tightening torque
• 1,200 ft lbs break away torque
• 3-speed selector
• LED light

bare tool

FLEXVOLT ADVANTAGE

DCK2100P2

20v Max brushless hammer driver/drill & impact driver kit

• DCD999 hammer driver/drill
  • 42% more power with 60v lithium battery
• DCF887 impact driver

kit includes (2) 5.0 amp lithium batteries, charger & bag

DCK263D2

brushless drywall screwgun & cut-out tool kit

• DCF620 drywall screwgun
• DCS551 cut-out tool

kit includes (2) 2.0 amp compact lithium batteries, charger & bag

DCN680B / D1  (manual)

20v MAX 18 gauge brad nailer

• 5/8″ to 2-1/8″ nail length
• tool free depth adjustment
• belt hook
• LED light
•  5.3 lbs

kit includes (1) 2 amp lithium battery, charger and bag

DCN681B / D1  (manual)

20v MAX 18 gauge narrow crown stapler

• 1/2″ to 1-1/2″ staple length
• tool free depth adjustment
• belt hook
• LED light
•  5.7 lbs

kit includes (1) 2 amp lithium battery, charger and bag

DCN650B / D1  (manual)

20v MAX 15 gauge angle finish nailer

• 1-1/4″ to 2-1/2″ nail length
• 34 degree fastener angle
• tool free depth adjustment
• belt hook
• LED light
•  5.8 lbs

kit includes (1) 2 amp lithium battery, charger and bag

DCN692B / M1  (manual)

20v MAX offset head framing nailer

• 2″ to 3-1/2″ nail length
• 30 to 34 degree paper tape collation
• tool free depth adjustment
• rafter hook
• 2 power settings – 2″ to 3″ and 3-1/4″ to 3-1/2″
•  8 lbs

kit includes (1) 2 amp lithium battery, charger and bag

DCN45RNB  (manual)

20v MAX roofing nailer

• 3/4″ to 1-3/4″ nail length
• 15 degree wire collation
• tool free depth adjustment
• belt hook
• up to 500 nails per charge
•  6.7 lbs

bare tool

DCS571B

4-1/2″ ATOMIC brushless circ saw

• 1-9/16″ depth of cut at 90 degrees
• 369 linear feet of 3/4 OSB on a 5 amp lithium battery
• dust port built in

bare tool

DCS391B

6-1/2″ circ saw

• 2-1/8″ depth of cut at 90 degrees
• 5,150 rpm
• 7 lbs

bare tool

DCS573B

7-1/4″ brushless circ saw w/FLEXVOLT ADVANTAGE

• 2-9/16″ depth of cut at 90 degrees
• 900 MWO power with 20v battery
• upto 77 percent more power with 60v battery
• 5,500 rpm
• optional dust port
• 8.2 lbs

bare tool

DCS334B

brushless jig saw

• variable speed trigger & dial
• LED lights
• quick change blade clamp accepts “T” shank blades

bare tool

DCS356B

brushless oscillating tool

• 3-speed selector switch
• variable speed dual grip trigger
• LED light
• quick change one fit style blades

bare tool

DCS367B

brushless compact recip saw

• 1-1/8″ blade stroke length
• 4-position blade clamp
• 14-1/2″ tool length
• 5 lbs

bare tool

DCS380B

recip saw

• 1-1/8″ blade stroke length
• variable speed trigger
• 18″ tool length
• 6 lbs

bare tool

DCS386B

brushless recip saw with FLEXVOLT ADVANTAGE

• 1-1/8″ blade stroke length
• 50% more power with 60v battery
• variable speed trigger
• 7.7 lbs

bare tool

DCS551B

drywall cut-out tool

• 26,000 rpm motor
• 1/8″ & 1/4″ collets
• tool-free bit change

bare tool

DCS361B/M1

7-1/4″ sliding miter saw

• 2″ x 8″ dimensional lumber cross cut capacity at 90 degrees
• 5-1/2″ miter cut at 45 degrees
• 3-1/2″ vertical base board cut capacity
• 30 lbs

kit includes material clamp, blade, 4.0 amp lithium battery, charger

DCS373B

metal cutting circ saw

• 5-1/2″ carbide tipped blade
• 3700 rpm
• LED light
• 1-11/16″ depth of cut at 90 degrees
• 6.8 lbs

bare tool

DCS371B

compact band saw

• 2-1/2″ max cut capacity
• 32-7/8″ blade length
• LED light
• 8 lbs

bare tool

DCS374B

brushless deep cut band saw

• 5″ x 4-3/4″ max cut capacity
• 44-7/8″ blade length
• LED light
• 12.4 lbs

bare tool

*NEW*

DCG416B

4-1/2″ – 5″ angle grinder with FLEXVOLT ADAVANTAGE 

• 9,000 rpm motor
• 54% more power with 60V battery
• quick-change wheel release
• E-CLUTCH & kickback brake
• tool free guard adjustment
• 3.92 lbs

bare tool

DCH273B

brushless 1″ SDS+ L-shape rotary hammer

• 3/16 – 1/2″ optimal drill recommendation
• 2.1 joules impact energy
• drill / hammer drill / hammer only modes
• 6.8 lbs tool only 

bare tool

DCH273P2DHO

brushless 1″ SDS+ L-shape rotary hammer kit

• OSHA compliant w/DWH303DH on board extractor

kit includes (2) 5.0 lithium batteries, charger, depth rod, side handle, retractable utility hook & box

DCW210B

brushless random orbital sander

• 5″ x 8 holes hook & loop backing pad
• variable speed dial
• PSA backing pad available (N373679 sold separately)

bare tool

DCW600B

brushless compact palm router

• 1/4″ collet
• LED light
• soft start motor
• variable speed dial

bare tool

DCP580B

brushless planer

• 3-1/4″ planning width
• 5/64″ depth of cut
• edge chamfering  grooves

bare tool

DCS498M1

fiber cement shear

• 5/8″ max cut capacity
• LED light
• variable speed trigger

kit includes 4.0 lithium battery, charger & bag

DCV581H

corded/cordless wet-dry vacuum

• 18v/20v batteries and 120v 
• washable/reusable HEPA filter
• 5′ x 1-1/4″ diameter hose
• on-board tool storage

bare tool

DCGG571B

grease gun

• 14.5 oz cartridge capacity
• 16oz bulk capacity
• 42″ hose
• LED light
• variable feed

bare tool

DCE560B

10 oz caulking/adhesive tool

• LED light
• variable speed trigger & dial
• anti-drip feature
• 4.9 lbs

bare tool

DCE570B

29 oz caulking/adhesive tool

• LED light
• variable speed trigger & dial
• anti-drip feature
• 4.66 lbs

bare tool

DCE580B

300-600 ml sausage caulking/adhesive tool

• LED light
• variable speed trigger & dial
• anti-drip feature
• 4.9 lbs

bare tool

DCR025

bluetooth charger radio

• run off 20v & 60v lithium batteries & 120v
• charge 20v & 60v lithium batteries when plugged in
• Aux & 2.1 amp USB charging ports
• 2 ac outlets

DWST08810  (video)

TOUGHSYSTEM radio + charger

• 4-full range tweeters
• subwoofer
• water & dust resistant
• bluetooth, 3.5mm aux jack
• 5v USB charger port
• runs off 12v, 20v or plug in 120v
• charges 12v & 20v lithium batteries

DCE800B      (manual)

brushless drywall sander

• 9″ hook & loop backing pad
• variable speed
• telescoping shaft
• articulating head
• 49″ closed length
• 8.59 lbs

DCE100B

20v compact jobsite blower

• 135 mph
• 100 cfm
• 3-speed selector
• 2.5 lbs

bare tool

DCL077B

compact task light

• upto 2,000 lumens
• tripod mount
• daylight hue
• accepts 12v, 20v & flexvolt batteries

DCL043

jobsite LED spotlight

• 3 LED lights – 2 brightness settings
• seen upto 508 yards
• 1 red LED to preserve night vision
• 90 to 1,000 lumens
• 4 – 13.5 hour run time

DCL079B

tripod LED light

• 1,001 to 3,000 lumens
• 3 brightness settings
• telescoping pole upto 7′
• 11 hour run time 

DCD460B / T1 / T2

stud & joist drill

• 1/2″ all metal chuck
• e-clutch perform & protect feature
• 2 speed (0-300/0-1250 rpm)
• recommend max drill capacity
  • 5″ hole saw
  • 1-1/2″ auger bit
  • 4-5/8″ self-feed bit
  • 6.83 tool height

T1 kit includes (1) 6.0 amp lithium battery, fast charger, side handle & bag

T2 kit includes (2) 6.0 amp lithium batteries, fast charger, side handle & bag

DCS578B / X2

brushless 7-1/4″ circ saw

• 2-9/16″ depth of cut at 90 degrees
• 2″ depth of cut at 45 degrees
• 57 degree bevel capacity
• electric brake
• LED light
• rafter hook

kit includes (2) 9.0 lithium battery, fast charger, blade & bag

DHS716AB / AT2

FLEXVOLT 12″ double bevel compound miter saw

• runs off (2) 60 volt batteries or 120 volt AC adapter
• 10″ cut capacity at 90 degrees with back fence
• 4″ x 6″ cut capacity at 45 degrees miter
• 6-5/8″ vertical nested crown cut capacity
• 6-1/2″ vertical base board cut against fence
• 44 lbs

kit includes blade, dust bag, (2) lithium batteries, AC adapter, dual bay fast charger

DHS790AB / AT2

FLEXVOLT 12″ double bevel compound sliding miter saw

• runs off (2) 60 volt batteries or 120 volt AC adapter
• 4″ x 16″ cut capacity at 90 degrees with back fence
• 4″ x 8″ cut capacity at 45 degrees miter
• 7-1/2″ vertical nested crown cut capacity
• 6-3/4″ vertical base board cut against fence
• 56 lbs

kit includes blade, dust bag, (2) lithium batteries, AC adapter, dual bay fast charger

DCS7485B / T1

brushless 8-1/4″ bench top table saw

• 2-1/2″ max depth of cut at 90 degrees
• 24″ capacity to rip material to right right of the blade
• rack & pinion fence adjustment
• on-board storage
• runs on single 60v battery only 
• 48 lbs

kit includes (1) battery, blade, push stick, blade guard, riving knife, miter gauge and charger

DCS389B / X2

brushless reciprocating saw

• 1874 unit watts out
• 1-1/8″ blade stroke
• 17.725″ tool length
• 7.56 lbs

kit includes (2) 9.0 amp lithium batteries, blade, charger & bag

DCG418B / X1

brushless 4-1/2 – 6″ angle grinder with brake

• delivers 13 amp equivalent power
• E-clutch system and kick bake brake
• 9,000 rpm for 6″ wheels
• 4.66 lbs

kit includes (1) 9.0 amp lithium battery, 4-1/2″ guard & 6″ guard, side handle charger & bag

DCH481B / X2

brushless 1-9/16″ SDS-MAX combination rotary hammer

• 6.1 joules of impact energy
• E-CLUTCH & mechanical clutch
• 1/2 – 1-1/8″ optimal concrete drilling
• 3″ core bit
• 11.9 lbs

kit includes (2) 9.0 amp lithium batteries, side handle,                               charger & case

DCS690B  (manual)

60V MAX 9″ brushless cut-off saw

• 3-1/4″ depth of cut at 90 degrees
• approx. 96 cuts on #5 rebar
• approx. 25.5′ by 1″ score cut in concrete
• beltless all metal drivetrain
• dual-sided water feed
• heavy-load indicator
• 10.85 lbs.

includes abrasive wheel & diamond wheel

DCCS2560T1

air compressor kit

• 2.5 gallon tank
• 1.2 cfm @ 90 psi
• 79 decibel
• 21.5 lbs

kit includes (1) 60v 6amp lithium battery, fast charger

DWST24082

ONE TOUCH TOOL BOX

• 23.8″ x 11.333″ x 11.333″
• includes 1/2 tray

DWTS17807

TSTAK II FLAT TOP

• 17-1/4″ x 13″ x 6-3/8″
• 66 lbs. capacity

DWST17808

TSTAK I LONG HANDLE

• 17-1/4″ x 11-7/8″ x 8″
• 66 lbs. capacity

DWST17806

TSTAK VI DEEP BOX

• 17-1/4″ x 11-7/8″ x 13″
• 66 lbs. capacity

DWST17803

TSTAK III SINGLE DEEP DRAWER

• 17-1/4″ x 11-7/8″ x 6-7/8″
• 16.5 lbs. capacity

DWST17889

TSTAK CART

• 210 lbs. capacity

DWST60436

TOUGHSYSTEM 2.0 rolling tower

• DWST08450 tool box
• DWST08400 x-large box
• DWST08165 rolling box

DWST08165

TOUGHSYSTEM 2.0 TOOLBOX

• 21-3/4″ x 14-3/4″ x 7″
• IP 65 dust & water rating
• 110 lbs. capacity

DWST08300

TOUGHSYSTEM 2.0 LARGE TOOLBOX

• 21-3/4″ x 14-3/4″ x 12-3/8″
• IP 65 dust & water rating
• 110 lbs. capacity

DWST08400

TOUGHSYSTEM 2.0 TOOLBOX

• 21-3/4″ x 14-3/4″ x 16-1/4″
• IP 65 dust & water rating
• 110 lbs. capacity

DWST08212

TOUGHSYSTEM 2PK BRACKET

• 176 lbs. max load capacity
• use with DS CARRIER

DWST08121

TOUGHSYSTEM 2.0 DEEP FOAM INSERT

• 3″ deep foam

DWD112

3/8″ keyless chuck drill driver

• 8 amp motor
• 0 – 2,500 rpm
• variable speed trigger

DWD215G

1/2″ keyless chuck mid-handle drill driver

• 10 amp motor
• 0 – 1,250 rpm
• metal gear housing

DW130V

1/2″ spade handle drill

• 9 amp motor
• 0 – 550 rpm
• great for drilling & mixing

DWD460K

1/2″ stud & joist drill

• 11 amp motor
• 0 – 300/0 – 1,300 rpm 2-speed gear box
• variable speed trigger
• mechanical clutch in low speed
• E-Clutch (bind-up control)

DW292

1/2″ impact wrench

• 7.5 amp motor
• 345 ft lbs max torque
• forward / reverse rocker switch
• ac/dc power

DW276

all-purpose screwgun

• 6.5 amp motor
• 2,500 rpm
• metal gear housing
• 3.6 lbs

DW267

versa-clutch screwgun

• 6.5 amp motor
• 2,000 rpm
• Versa-clutch – dial in torque
• 3.7 lbs

DWD525K

1/2″ mid-handle hammerdrill kit

• 10 amp motor
• 0 – 1,200 / 0 – 3,500 rpm
• 0 – 56,000 bpm
• 5/32 – 7/16″ bit recommended in concrete
• 1-1/2″ bit recommended in wood

DWE575

7-1/4″ circular saw

• 15 amp motor
• 2-9/16″ depth of cut at 90 degrees
• 8.8 lbs

DWE575SB

7-1/4″ electric brake circular saw

• 15 amp motor
• 2-9/16″ depth of cut at 90 degrees
• 8.8 lbs

DWE575DC

dust collection adapter for DWE575 & DWE575SB

DWE357

compact reciprocating saw

• 12 amp motor
• 1-1/8″ stroke length
• 4-position blade clamp
• 14.5″ length
• LED light
• 6.8 lbs

DWE7485

8-1/4″ compact jobsite table saw

• 15 amp motor
• 5,800 rpm
• 2-9/16″ depth of cut at 90 degrees
• 24.5″ rip capacity w/ rack & pinion fence
• 46 lbs

DWE7491RS

10″ jobsite table saw w/ rolling stand

• 15 amp motor
• 4,800 rpm
• 3-1/8″ depth of cut at 90 degrees
• 32.5″ rip capacity w/ rack & pinion fence
• 90 lbs w/stand

DWS780

12″ double bevel compound sliding miter saw

• 15 amp motor
• 3,800 rpm
• 14″ cross cut capacity at 90 degrees
• 7-1/2″ nested crown cut capacity
• 6-3/4″ vertical base board cut capacity
• 56 lbs

DWM120

deep cut band saw

• 10 amp motor
• 5″ x 4-3/4″ rectangular cut capacity
• variable speed motor
• LED light
• 15 lbs

DW735X

13″ bench top planer

• 15 amp motor
• 10,000 rpm / 96 or 179 cut per inch gear box
• 3-knife cutter head
• automatic carriage lock
• 1/8″ max depth of cut
• fan assisted cut ejection port

includes infeed & outfeed tables, extra set of knives

DWC860W

4-3/8″ wet/dry handheld tile cutter

• 10.8 amp motor
• cut granite, porcelain, marble & glass
• 1-3/8″ depth of cut
• 6.6 lbs

kit includes 12′ water line

D36000S

10″ high capacity wet tile saw with stand

• 15 amp motor
• 18 x 37″ max rip capacity
• 24″ diagonal cut capacity
• 8.5″ cross cut capacity

DWP611

1-1/4 hp compact router

• 7 amp soft start motor
• 1/4″ collet
• 1.5″ travel depth with fixed base
• 16,000 – 27,000 rpm
• LED light

DWP611PK

1-1/4 hp compact router kit

includes plunge base & bag

DW618

2-1/4 hp fixed base router

• 12 amp soft start motor
• 1/4″ & 1/2″ collets
• 8,000 – 24,000 rpm
• 1/64″ micro depth adjustment ring

DW618PK

2-1/4 hp router kit

includes plunge base, fixed base, vacuum adapter & case

DW625

3 hp plunge router

• 15 amp soft start motor
• 1/4″ & 1/2″ collets
• 8,000 – 22,000 rpm 
• 2-7/16″ plunge stroke

DW682K

plate joiner kit

• 6.5 amp motor
• 0 – 90 degree adjustable fence
• preset depth stops for all common biscuit sizes

DW680K

3-1/4″ planer kit

• 7 amp motor
• 3/32″ depth of cut
• standard resharpenable high speed steel knives or carbide double sided knives accepted
• 1/2″ rabbeting depth

includes case

D26960K

heat gun with LCD display

• 13 amp
• 150 to 1,100 degrees Fahrenheit (50 degree increments)
• over load protection

includes cone nozzle, fishtail surface nozzle, 10 other common accessories & case

DWE7800

4.7 amp drywall sander

• 9″ hook & loop disc
• articulating head
• variable speed
• 63″ tool length
• 9.5 lbs

includes velcro hose strap & soft backing pad

DWE6441K

1/4 sheet palm sander kit

• 2.3 amp motor
• 14,000 orbits per minute
• dust collection capable

includes punch plate & bag 

DWE6423K

5″ random orbit sander kit

• 3 amp motor
• 3/32″ orbit
• 8,000 – 12,000 orbits per minute
• 5″ 8 hole hook & loop pad

includes bag

DWE6401DS

5″ variable speed orbital disc sander

• 6 amp motor
• adjustable dust shroud
• 5″ 8 hole hook & loop backing pad

DWP849X

7″/9″ variable speed polisher

• 12 amp motor
• soft start
• electronic variable speed
• hook & loop pad
• 6.7 lbs

DWE4214

4-1/2″ small angle grinder

• 11 amp motor
• slide side switch
• 11,000 rpm

D28499X

7″/9″ large angle grinder

• 15 amp 3,950 max watt out motor
• 6,000 rpm
• accepts ac/dc power 

DWE46103

6″ high performance tuckpoint/cutting grinder

• 13 amp motor
• e-clutch/over load protection
• 9,000 rpm
• power loss reset

DWE46253

5″ brushless surface grinder with dust shroud

• 13 amp motor
• electronic kickback brake
• variable speed
• power-loss reset
• 6.9 lbs

includes DW4777T 5″ diamond turbo wheel

DWV010

8 gallon wet/dry HEPA/RRP dust extractor

• 15 amp motor
• 150 max cfm
• auto filter clean every 30 seconds
• power tool actuation on/off outlet
• EPA approved for lead removal with DWV9330 filters

includes 15′ anti-static hose, 8′ power cord, DWV9402 fleece bag

DWV012

10 gallon wet/dry HEPA/RRP dust extractor

• 15 amp motor
• 155 max cfm
• variable suction control
• auto filter clean every 30 seconds
• power tool actuation on/off outlet
• EPA approved for lead removal with DWV9330 filters

includes 15′ anti-static hose, 15′ power cord, DWV9402 fleece bag

DW08302CG

green 3-spot laser level

• 1/8″ @ 30′ accuracy
• 120′ range
• integrated magnetic swivel base
• self leveling

includes batteries & case

DW0822

red cross line & plumb spot laser

• 3/16″ @ 50′ accuracy plumb
• 1/8″ @ 50′ cross line
• constant pulse mode – 165′ range with detector
• magnetic swivel base
• self leveling

includes batteries & case

optional detector #DW0892 (special order)

DW0811

red 360 degree horizontal line with vertical line laser

• 1/8″ @ 30′ accuracy
• 100′ range – 165′ with receiver
• constant pulse mode
• self leveling

includes batteries & case

optional detector #DW0892 (special order)

DW0165S

165′ laser distance measurer

• 1/16″ @ 30′ accuracy
• area & volume calculator
• Bluetooth connect to Dewalt’s tool connect app

DW0892G

green laser line detector

• extends laser working range up to 165′
• works with DW0822LG & DW089LG