Power Tool – Metabo HPT

WH36DBQ4

brushless multivolt triple hammer impact driver

• 1,859 in lbs torque
• triple hammer – faster drive, less vibration
• 4.1 lbs with battery

bare tool

• compatible with 36V MultiVolt AC power adapter

C3607DAQ4

brushless multivolt 7-1/4″ circular saw

• 2-7/16″ cut capacity at 90 degrees
• approximately 220 cross cuts per charge on 2×8 boards
• soft start & electric brake
• 9.7 lbs

bare tool

• compatible with 36V MultiVolt AC power adapter

CR36DAQ4

brushless multivolt reciprocating saw

• 1-1/4″ stroke length
• user vibration protection
• 10.6 lbs

bare tool

• compatible with 36V MultiVolt AC power adapter

G3612DAQ6

brushless multivolt 4-1/2″ angle grinder – side slide switch

• variable speed dial
• anti-kickback protection
• auto speed mode
• 7.1 lbs

bare tool

• compatible with 36V MultiVolt AC power adapter

CN18DSLQ4

brushless multivolt nibbler

• 16 gauge steel cut capacity
• 18 gauge steel cut capacity
• 13 gauge aluminum cut capacity
• 3.2 lbs w/o battery

bare tool

• compatible with 36V MultiVolt AC power adapter

DH36DMAQ2

brushless multivolt 1-9/16″ SDS-MAX rotary hammer

• 7.7 ft lbs impact energy
• reactive force control
• hammer / hammer drill modes
• 17.4 lbs 

bare tool

• compatible with 36V MultiVolt AC power adapter

C3610DRAQ4

brushless multivolt 10″ dual bevel sliding miter saw

• 3-1/2 x 11-1/2″ cut capacity at 90 degrees
• 1 x 8″ miter/bevel right
• LED light
• laser marker
• 45.5 lbs

bare tool

• compatible with 36V MultiVolt AC power adapter

ET36A

multivolt AC adapter

• 20′ cord
• converts 36 volt to AC power

UC18YSL3B1

36v/18v multivolt slide battery and charger starter kit

• 36v 4 amp or 18v 8 amp battery
• 52 minute charge time

NR1890DC

18V 20degree plastic collated nailer kit

NR1890DC

18v 34 degree paper collated nailer kit

NR1865DMA

18v 15gauge angle finish nailer

(kit)

NR1865DM

18v 16gauge finish nailer

(kit)

METABO HPT

NT1850DE

18v 18gauge nailer

(kit)

METABO HPT

NP18DSAL

18v 23gauge pin nailer

CN16SA

16 gauge nibbler

• 3.5 amp motor
• 1/16″ steel cut capacity
• 3/64″ stainless steel cut capacity
• 3/32″ aluminum cut capacity
• 1-5/8″ minimum cut radius
• 3.5 lbs

CE16SA

16 gauge shear

• 3.5 amp motor
• 16 gauge steel cut capacity
• 18 gauge stainless steel cut capacity
• 12 gauge aluminum cut capacity
• 1″ minimum cut radius
• 3.8 lbs

SP18VA(H)

7″ sander / polisher

• 11 amp motor
• variable speed
• 6.2 lbs

C10FSHS

10″ sliding dual bevel compound miter saw with laser marker

• 12 amp motor
• 3-11/32 x 12″ cut capacity at 90 degrees
• 1-3/16 x 8-19/32″ cut capacity at 45 degree miter/bevel
• 45.9 lbs

NR83AA3(S)

20 degree plastic collated framing nailer

NR90AES1M

20 degree plastic collated framing nailer

NR90ADS1M

34 degree paper tape framing nailer

NT65MA4

15 gauge 34 degree angle finish nailer

NT65M2

16 gauge straight finish nailer

NT50AE2

18gauge brad nailer

NP35A

23gauge pin nailer

NV65AH2

2-1/2″ coil siding nailer

NV45AB2

roofing nailer

N3804AB3

1/4″narrow crown stapler 

N500BAC2

7/16″crown construction stapler